What is Capacitor 1uF?
I have V4 gap mainboard. Installed Magic 3.1. Everything installed correctly.
The problem is before i install chip, there is a Capacitor with 1uF 65V.... can't read clear. Anyone know why there is a capacitor in non modded ps2?
When open it I make the wires for capacitor loose. I don't know where the points on board to solder. Can anyone help?
When I turn it on, and goto browser screen, sometimes the cd spin but sometimes not. Try with original and backups. both same problem. After a while I turn it off and turn it on again, got black screen. But if I turn it off for more than 10 minutes and turn it on, will goto browser screen.
One more thing, under S point on the board (Yellow small thing) is missing (Look V4 gap magic 3.1 diagram).
There are capacitors everywhere in every electronic piece. They do many things inluding smoothing and reducing noise.
Anyway you don't provide enough info for proper diagnosis and my advice is you take the PS2 to a pro before you get into further difficulty.
This 1uF capacitor is not like any capacitor on board. This capacitor use 2 long wires to solder on the board. What can I do with missing small part under S point on board (Yellow - see V4 gap diagram magic)