The above video goes away if you are a member and logged in, so log in now!
Virgin installer bios resetting, tray not opening
Virgin installer bios resetting, tray not opening –
Im pretty good with a soldering iron i check continuity with all my connections and double checked to make sure i didnt bridge any pins or pads.
PS2 boots fine comes to the select language screen/browser ect. It does not recognize my PS2 memory card but PS1 card is recognised. The dvd Tray will not open when you hit the eject button.(reopening the case now) if I turn of the console and turn it back on the bios resets and i have to reenter language and browser settings. Any help is appreciated.
V5 with a Magic 3.1
Last edited by Histoplasmosis; 08-08-2004 at 09:01 PM.
Does the PS2 work fine without the Magic 3.1? Sounds a lot like an installation problem. Maybe you soldered the wire wrong or got a solderball somewhere you don't even notice. Check the whole board over for solder balls.
well sometimes the dvdrive opens and then sometimes it dosent i checked everything with a 50X magnifying glass Ive had this PS2 for 4 years time to just buy a premodded PS2 F this crap.
used to take 5 min to register a game unmodded till i tore it apart and cleaned the lazer
Hmmm, sounds like the same thing is happening to a V3 I was modding with the Magic 3.1. The PS2 will open the eject tray only when it's completely booted and at the browser screen or during gaming. But it will not close when the PS2 is at the booting screen (cubes and electrons flying around).
and to top it off the moron that sold me the chip didnt even static bag it
Does your PS2 behave like the V3 I modded?
it ejected after it was on for a while... now i got no video mabey a good smack will help it lol, ill im you