The above video goes away if you are a member and logged in, so log in now!
V9 problems with picture !
V9 problems with picture ! –
I have here V9. When it is cool ( first 1-2 minuts ) everything is ok, but after that the picture is gone. Only the picture and sound, other things looks fine. ( cd is spinning, open/close tray ) It is the same moded/unmoded. The fuses are fine ! Any idea ?
I have noticed something else. After 20 sec. it freeze the picture at browser, while the sound is still going. After 1-2 minuts there is no picture and sound.
Looks like one of the point/pins where you soldered is not anymore well connected and is detouching when it heats up.
other possibility a small drop of solder in some place that makes short when it heats up.
Give a good look at all the soldered points and pass over them again the solder tool (especially the BIOS area).
Is the fan in your PS2 running?
To Chip&Chop yes, I checked everything, the install is very clean, there are no solder balls or anything like that. I think that some procesor have internal problems when it heats up.
To Thinkdiff yes
Try anyhow passing again the solder iron on the bios pins, it might solve the issue
OK I will try this tonight. I also used hot air gun . When the board is cooled with "COLD SPRAY" (quick coolant to discover the source of electronic faults) it works 5-6 min.