v9 not working. need info.

Hi. I need some info from those Resistors (or are the condensators) near LB and that sled motor connector. I mean those 4 in a row ones.
I get just strange readings when measured.
Also if someone knows that is it OK if there is 2 lines together in the Ribbon cable that goes from RESET/EJECT to MB?

thanks

Tomi

a picture would help.
EnTiTy

are those 4 components you ask about?
acording to the picture ohmeter reading:

A,C - capacitors
B,D - I't look to me as a resistors.
B - 1.3 Ohm
D - 1.4 Ohm

Those tests from GH-023 pal.

Hope it's help

Thanks for your picture (I have to get a digital camera and soon -) )

I will test those resistors in a weekend and we'll see if i get same values.
And the problem is in SLED that won't come out when pressing EJECT. It only starts to blink. But when pressing RESET many times in a row, the SLED will come out very fast.
Have checked all place for shorts or bridges and nothing. Getting a little bit boring to open that thing up again =)

-Tomi