v9 and matrix infintiy

[linuxnoob]

Problem is no discs will read now. Once the chip was installed originals and backups wont read. I've done the psx1 and xbox chips this was the first of my ps2 tries. Do I need to adjust the laser? If so how? Also I've noticed with my chip on other website install pics there is a extra wire used as a jumper up by where the cdrom clip down is at. http://www.norcalmods.com/graphix/v9-infinity.jpg

Anyone know what this is for? On the matrix website it dosent have this jumper and the sx wire is located in different place.

http://www.infinitymod.com/matrix/fi...v9install2.jpg

Please help been working on this for the last 3 days soldering and re-soldering.

[T07N]

Is that your infinity or this? http://www.infinitymod.com/matrix/fi...V09/USA-V9.JPG

Those matrix infinity are the other matrix infinity who are bogus.

[spedmetal]

The jumper you are referring to is the Romeo mod that is performed on the v9/v10 PS2's. This should have nothing to do with your PS2 not booting originals of back-ups, unless your laser and or LA is now fried. Or perhaps you blew a fuse.

You might want to try totally removing your chip to make sure your PS2 is still wotking the way it should be.

[linuxnoob]

TO7N you are right, that is the chip I have. Where are the fuses That you are talking about spedmetal? The Ps2 can boot up and give me the sony logo screen along with the browser just wont read any discs.

[davbere]

It could also be your cdvd points. a b g h i .
Make sure they are in the right place, have a solid connection and are not touching each other.