The above video goes away if you are a member and logged in, so log in now!
V9 and Magic 50k problems
V9 and Magic 50k problems –
Hello, first sorry for my English.
I have put Magic 50k into two V9. When I prove them, they load backups normally but when the console are few minutes working, if you reset it, it donĀ“t load any game (dvd, original and backup), black screen or "insert PS2 disc" message. I remake all installation and nothing, they are equal. Then I try do the installation directly on controller chip (B,C,D,E,F,G,H,I) for do the wires shorter but it donĀ“t work (itĀ“s seems the time working good are a little more than before, but in a few minutes if you restart...). I have protect the LA chip with a voltage reduction and with 2.1 ohm resistors on bobines (I have tried without protections). Any idea? Some one can help me?
Thanks you very much.
I have the exact same problem with a V10. I've also done the LA-chip mod.
Is the deadbeef mode for extend the reset state could help ?
nfc_87 I think this problem are for a defect on magic chip. I have put in the two V9 duo-2 chip and the problem are out.
What kind of wire do you use because it can be related to the type of wire you use for the power point (5,5v). Try to use a thicker wire for the power point because with a thinner wire it sometimes cut the power after a few minutes.