V7 Seems Dead after a Magic 5 install

[barclayrl]

Hey guys i decided to upgrade my V7 that had a magic 3.1 to a magic 5 (so i could boot from the browser) Now i cannot get any picture. only the black screen. I have removed all wires and mod chip then reassembled. there is still no picture. what should i look for. there are absolutly no bridges on any bios legs. I really dont know what could have happened i have done about 15 installs to date this is my 1st failed attempt. Also this is my first attemp with a magic 5.... I knew i should have bought the DMS3!!! Anyhow what should i look for

[EnTiTy]

you could have blown a fuse dont presume ther is no shorts on the bios legs the naked eye aint as good as you thing use a mag glass on the bios were talking small shards her or a ball under one of the legs.
EnTiTy

[barclayrl]

Also i wanted to add that the PS2 boots up and the CD spins normally but there is just no picture. ( it even seems to be reading the game

[barclayrl]

i used a 10X mag glass on the bios
still dont see any shorts

[EnTiTy]

go for the fuse's then.
EnTiTy

[barclayrl]

what fuses could i test???

[barclayrl]

were are the fuses at (i only follow instructions on how to install the chip) i dont know what all the parts do

[barclayrl]

should i just sell it for parts??

[EnTiTy]

if you check the faq forum you will see layouts for where the fuses are and how to test.
dont give up on it yet .
EnTiTy

[barclayrl]

if everything works but the video which fuse should i check out. is there any specific to the video output. (i think that is the only problem