The above video goes away if you are a member and logged in, so log in now!
v7 GH-022 dead after mod
v7 GH-022 dead after mod –
I've got a V7/8 GH022 with a gap bios (080)
I've fitted a ripper chip and when powering on its dead. no logo. i found out if i disconnect the O wire it boots up and the logo appears. ive dedone all the wires and also tried another chip. still the same prob. also checked around the O point with a meter. no shorts.
did you bridge the solder points on the ripper chip
also just tried a nh9 (the only other chip i've got lying around) - gives the same problem.