The above video goes away if you are a member and logged in, so log in now!
V5/6 solder point's for meesiah 2
V5/6 solder point's for meesiah 2 –
Hi does anyone have some good close up shots of the points on this board' I have rebuilt mine and get red screen shot on all back ups but works perfect on originals 'I am not sure on the power connection should it be to the little resistor cannot tell from install photo.
Thanks in advance for any help
u got the wrong piont give me a while i post u power point
its clear as day here dont look at the picture of the whole mobo scroll down to pictures of individual points
solder the power to the silver circle near the legs i say u got a working messiah2 then
Hi yes I think I soldered to the point your talking about,a little solder dot !! my eyes must be bad I cannot tell in the photo if it was the right spot, may be my old comp, and NO I have not got a working messiah 2 it does nothing !!!!! thats why I was checking this bit out I know the ground is good because I straped 2 earths to it 1 for the SCEx wrap around and other for the chip do you know if the connection for the SCEx wire would stop the chip working becuse this wire was a tight bitch and it is joined but I did not spend a lot of time on it as I did not want to burn the resistor out ,I am begining to wonder if I have a bad chip ? how can you tell,all I get is red screen on all backups but as I said all original 's work ok and music dont have any DVD's to try.
Thanks again hope you can help me out
Hi qwm thanks for the advise the picture's are better at the foundmy site,the power point is different to messiha page so maybe this is why nothing is working !!!
Thank's again Phil