v4 w/dms3 Please Help
I have just installed a dms3 in my v4, and the ps2 boots as normal, I have checked the eject wire as dms suggests and it is fine, I also rerouted some of the wires on the board to take care of any interference. It seems that devolution mode will load, as when I hold triangle it bypasses the boot screen and goes straight to the memory card screen, but I cannot get any other modes to work.
Any help will ge greatly appreciated.
I also cannot get the bios to flash.
The only thing that I can think of that may be a problem are the solder points on the controller. In the installation diagrams they give three different options, and to make things simplier on myself I choose some points from one option and some from another. The points appear to be the same jsut on the opposite side of the board. I may be wrong and if I am I will just change those points, was I wrong?