I opened my V12 and modded it with a MX4. Press power button goes green for about 2 seconds then turns red and shuts off. What the hell did I do Wrong? :crazy: The ribbon for the power button got scratched on assemble. Is there a replacement for the power/reset button? I checked the power/reset button and its not sticking.
I checked my wires again and again, then had someone else look at it and all the wires were correct!! No burns on the board (no smoke when plugged in), no traces burned, the summ0nes fix was double checked as well. Everything I did was good, I checked all connections to the board with no soldier bridging any connections. No resistors, chips or capacitors removed accidently.
Is it possible I have sent a current to one of the chips and removed its programing?
So, I removed the chip and all the wires including the summ0nes fix. Still same problem no boot, power button goes green for about 2 seconds then turns red and shuts off. Is there something to do to fix this problem that is well known??? :banghead: