The above video goes away if you are a member and logged in, so log in now!
V12 Matrix infinity doesnt turn on - green light changes to red after 1 second
V12 Matrix infinity doesnt turn on - green light changes to red after 1 second –
Im attempting to install a matrix infinfity in a v12.
I installed the chip and the matrix fix. Once i put it back together the ps2 would turn on - however when i closed the lid and the disk started to spin the ps2 would automatically turn off after 3 secs
i tried to redo the install and now the ps2 doesnt turn on. the red light appears - if you press the power button it changes to green and then back to red after a second. there is not video output during this either...
anybody have this problem or know a solution?
I had one similar to this a while back, I think I had soldered the SX wire to the wrong end of the component - worth a look
Tired, so very tired
Last edited by cakcetin; 03-24-2005 at 04:09 PM.
i have the same problem but first it worked perfect booted the matrix cd and install the firmwire Start it up and it still worked put in a ps1 cd and then black screen and it only goes gren for like 0.5s then red
exact symtoms of ps14 blown
power on and immediate shut down to red light.
I have seen it on different machines with ps14 blown after soldering to it.
OK, I'm having the exact same problem. However, mine would randomly stay green if you try enough times and you'd hear some movement (I'm guessing it's the laser unit changing position) still no video or sound. If you reset it from green it will turn red again and not restart. I've read several threads on this and people are pointing out burnt ps3 or ps14. What are they? How are they fixed? I have V12 with matrix infinity by the way. Thanks in advance for any help. (My 1st post Wooot!)
it's fuses . Replace the bad one(s) sony tells you what fuses to replace with on the board.