The above video goes away if you are a member and logged in, so log in now!
V12 doesn't boot backup dvd!?
V12 doesn't boot backup dvd!? –
I have now modded 2 V12 consoles with modbo (and neofix ii), and both boot cd-r perfectly.
But with cd-rw the console switches of after like 5 seconds (I can live with that)
But the console doesn't boot any dvd's!
I tried the following media:
TDK DVD+RW (works perfect in my V7)
philips DVD-R (read somewhere else this was THE media to use for this console)
What could the problem be?
p.s. originals are no problem
double check your wiring and solder points. do original dvd's boot? if not remove the mod and check again.
Make sure you burn the media at 2x max.
original dvd's do boot.
I always burn at 2x (2,4 with dvd+)
Any suggestions witch wires it micht be?
check them all
Ok, try taking the Neofix off and using summ0ne's fix. See if that works. If that's not the problem then it's your install. Do you have a picture of your install?
I'll see if I can borrow a digital camera and get one up, I only have my phone wich is poor quality, so hang on. Any request of wich sector of the mobo you want a pic?
We want to see the whole mod.
Could I try it without any fix just to see if it works? And then if that works switch off just so I know its not my wiring and try another fix (like summ0ne's fix, read a lot of good news about it)
hi, remove neo fix, add summ0ne fix!
shorten gnd (cannot be bad )
also you have forgotten to solder the "H" Wire, do this and DVD backups will work!
always use the US/JAP install diagramm, even your ps2 is a pal one!