The above video goes away if you are a member and logged in, so log in now!
v10 romeo mod w/ no modchip=no spinup?
v10 romeo mod w/ no modchip=no spinup? –
i installed a duo2 se on a v10 w/ romeo mod all went fine but now the console doesnt spin the disc initially and the first red laser pulse is very weak (the lens does rise and fall but no motor spinning activity). I took out the modchip and the same thing happens. Checked all solder points especially vias and sony chip and all is fine, no solder bridges or anything. Please help
You have to check fuse 13
undo the romeo mod, reconnect pin17 to the original 12 volts. If that doesnt work you have a blown fuse or the LA is damaged.
I found a reference to ps13 on the board but cannot find the fuse itself. But it is so far away from the LA chip! Shounld't it be a fuse close to this chip? Suppose the fuse is blown can I use a normal discrete fuse from an electronics shop? What amperage value should I use?
i think its 2amp.. not sure though