Are there any chips the support Codebreaker?

**chalosf** · 10-31-2006,08:14 PM

I have tried the Infinity and the duo3 with no luck. i put the codebreaker disc and when i swap it with my my backup it doesn't recognize it.

**wmb88** · 10-31-2006,09:48 PM

i only know mi, modbo boot codebreak without problem, duo3 does not even boot.

**chalosf** · 11-01-2006,01:11 PM

Originally Posted by wmb88

i only know mi, modbo boot codebreak without problem, duo3 does not even boot.

Modbo does't work (i have the 745)..I have also tried with MI and firmware 1.82 and also doesn't work

**Slipknot** · 11-01-2006,09:51 PM

The Crystal Chip 1.2 Works With A Codebreaker 9.1 On A Ver.7-8 PS2.

Try This Chip I Have It And It Boots Normally, It Might Depend On Your Versions But Mine Works Great!

P.S You Have Two Press Reset At Least 5 Times Slowly To Make It Boot.
Also Don't Load It With Bootmanager Load It At The PS2 Screen.

You Can By This From Jit At Bysellcommunity Under Shopping On This Website!

**Bootlegninja** · 11-01-2006,11:11 PM

Matrix infinity w/ fw 1.88 or 1.91 on my v7 supports cb 7.1, 9.3 and the cracked 9.2

**wmb88** · 11-02-2006,01:34 AM

if mi 1.88 works then the modbo745/750 with 1.82 should work. i had a guy asked me to install modbo750 (fw1.82) as he wanted to play with his cb9.3 and i did. he never comes back after all. so it must have worked fine for him. the duo3, h20 do not even boot. they freezed at black screen after the PS2 logo.

**chalosf** · 11-02-2006,01:09 PM

Originally Posted by wmb88

if mi 1.88 works then the modbo745/750 with 1.82 should work. i had a guy asked me to install modbo750 (fw1.82) as he wanted to play with his cb9.3 and i did. he never comes back after all. so it must have worked fine for him. the duo3, h20 do not even boot. they freezed at black screen after the PS2 logo.

1.88 and 1.82 are different so maybe thats why it works for you...as far as the modbo 750 I don't know since mine is 745, your customer probably was using originals...

the modbo boots the the Codebreaker fine (9.2 or 9.3 or craked) but when I swap the disk for a backup it just gives an error (something like put a different disk) maybe i need to change a setting

**wmb88** · 11-02-2006,05:37 PM

1.88 only added hk console support and no other changes have been made since 1.82. yes, that customer has an original cb

**XOXJunkyXOX** · 11-10-2006,01:11 AM

my CB works with my v7 w/magic2 and v14 w/matrix, but not my v12 w/h2o

**Lusanagi** · 11-10-2006,12:15 PM

my v5 with Magic3 works ok with 9.2, either boot or launched from UlE, no problems

User Tag List

Thread: Are there any chips the support Codebreaker?

Tweet

LinkBack

Thread Tools

Display


	Would you like to get all the new info from PSX-Scene in your email each day? Subscribe to our Daily Digest! Want to learn more about the team keeping you up to date with the latest scene news? Read about them now! Check out our Developer bios, too!