The above video goes away if you are a member and logged in, so log in now!
summone pix advice –
The resistor on my board is not look like 303 or 683 so which value do I have to change
I measured the resistor itself, read about ~100K
The main board marked GH-032-12, and I bought it in Dec 2005
I have the picture, but do not know how to upload
ok so the tracking coil reisostors have the 3# code 01D?? you are corect its 100K no fix need on this board also check the focus reistors just to be sure. I have gotte 3 V12 sofar that need no fix but its hard to find new V12 now im going to have to do my premods on V13+ and save all the new V12 i find for people that want HD setups.
The focus resistor is 303, which = 30K ohm, do I need a fix for this ?
I am too confuse, I have seen some one add the fix on focus even with the 303K, when sommonefix refer the resistor value is "01D" then add the fix
no fix need V12.2 refer to updated pix you can apply the subzero fix if you like but i have yet to have any problems with systems that have 100K=01d risistors.