Strange v7 Problem
Modded a v7 Ps2 with a duo 2, and got some strange results. I knew the chip worked, seeing as it authenticated the disc when it booted, however i got a pure black screen right after the playstation 2 logo. Restarted hte system, and got a black screen. Put system into standby, started the system, and got no video at all, and no eject light. Put system into standby, and got black screen and eject light again, however it woldn't eject. Shut the system off for a bit, and it worked in this process again. Sometimes when i turn the system on, the intro or browser/system config screen give very strange sound (garbled or no audio), and i shut the system off immediatly. Upon taking the chip out, i still had the problem. I have cleaned all areas that the modchip came in contact with on the motherboard, yet it has not helped. Any ideas what is going on? Thanks folks!!!
You must have bridged some bios legs.Check it again carefully and if possible post picture of motherboard..
Bios legs are POMN and QTUVR on v7 board right? Thanks
Yes these are the BIOS pins...