strange 01d resistor value!

**swawel** · 09-06-2005,05:37 PM

Hey, i recently installed a modchip in a v12. Also did summones fix into it, and because ive trashed the small resistors (named 01d) before when soldering i checked their values after work was done. The upper one gave me 55 kohm and the other 88 kohm. I checked forum for their correct value and found 100kohm is correct. (this pstwo read media just fine)

I then opened another pstwo, with no modchip/summone installed, and i got the exact same values, around 55 and 88 kohms.

Can anyone tell me why i read that o1d resistors are 1000 kohms, when on my untouched mobo i had theese values?

thanks alot, greets to ps2-scene

**summ0ne** · 09-07-2005,05:22 AM

the resistors are connected to a circuit, so the circuit conductivity decreases resistance measurement.

Not only that, it will probbably give different values with different ohmmeters due to it being semiconductors.

**swawel** · 09-07-2005,02:06 PM

Well, if i still want to replace one of them, they are 100 kohms right ?

reg swawel

**summ0ne** · 09-08-2005,07:34 AM

yes.

or you can replace both to 30k /33k /68k
for 30k/33k apply the 560ohm fix, for 68k the 2.0k fix

**swawel** · 09-09-2005,01:36 PM

thx alot

User Tag List

Thread: strange 01d resistor value!

Tweet

LinkBack

Thread Tools

Display


	Would you like to get all the new info from PSX-Scene in your email each day? Subscribe to our Daily Digest! Want to learn more about the team keeping you up to date with the latest scene news? Read about them now! Check out our Developer bios, too!