A specific problem please advise
I have a version 7 board that I installed a MI. At first, there where no light and the ps2 had a blank screen. After cleaning up to a really specific detail
(I use a magnifying lamp that really enlarges things) every bios leg or point that was soldered into was clean and not touching anything. I checked the Ba chip to see if pin 8 was grounded and it wasnt. The fuse is still good and gives me a reading. The only thing I dont have pluged in the controller port casue I demaged the cable. Anyways, the ps2 now has the green light comming up but still no eject light. Cable is good cause I get a short when I touch both ends of each strand of the cable.
The main thing is what could be wrong. I did notice that the ps2 turns off with an delay. If I press the power button to turn off, it will so after a three second delay.
Any Ideas please. I did search and read from like the first page but It feels like im going in circles. Thank you all in advance.