Someone has attempted to solder XO'2 [B]&[C] points at the same point than Magic2's?

Loco · 10-05-2002,02:20 AM

I've aquired more soldering experience, but I'm always scared of via's (sort of

So I'm always trying to find alternate points...

(PS2/V7/GH-019)

Sadly, I've tested many points (with a multimeter) but I haven't found any alternate points to XO-2's [B] & [C] points.

Since this mod is a M2 clone, I thought B&C could be exchanged M2 like, but they doesn't seem to be same points.

Anyone have found some alternates yet?

Thanks a lot!

Loco · 10-05-2002,04:56 AM

I forgot... Can be 3.3V and Reset wires long? I'm mounting an on/off switch, but since it must be in the case, those wires need to be long....

Is the signal capable to go through 8 or 9 inches?

Thanks!

dotkambot · 10-07-2002,10:47 PM

the on off switch sounds like a cool idea. I hear that the ground should not be longer than 3 inches or so, but not much about the power cords... I bet not many have tried this though.

CN-Twat · 10-08-2002,10:23 PM

V7 Alt (B) and (C) for the X0-2

You can add a spst switch on the reset wire to turn on and off your X0-2.

Loco · 10-08-2002,10:37 PM

I indeed added a switch to "Reset" and the only thing that happened was that I can't go into PS1 mode when the switch is off... Every disc is forced to PS2 mode.

Unless there's some special kind of switch (I used a standard one) this didn't work for me...

But the alternate points did!

Greets!

User Tag List

Thread: Someone has attempted to solder XO'2 [B]&[C] points at the same point than Magic2's?

Tweet

LinkBack

Thread Tools

Display


	Would you like to get all the new info from PSX-Scene in your email each day? Subscribe to our Daily Digest! Want to learn more about the team keeping you up to date with the latest scene news? Read about them now! Check out our Developer bios, too!