Ripper 3.1 problem
i've got a problem with Ripper 3.1 modchip after installation to my v10 PS2. When turned on, medium in drive spins (sometimes very fast) and LED on modchip lits, but that's all - no sound, no picture. Interestingly, it's possible to disable modchip (3 x reset) - with mod disabled, PS2 behaves normally. (It should be possible to disable modchip with reset + start combination and there should be logo displayed when modchip is disabled, however neither works - only way to disable mod is 3 x reset, no logo). I guess there aren't flaws in installation, I checked every one wire with multimeter. (But who can say for sure, heh..) During installation, I also performed Romeo mod, but I don't think this is the problem - when mod is disabled, PS2 reads normally. I also noticed that there's resistor marked "104" just above SCEX point in my mobo, which appears to be missing in installation diagram. Can it be a reason? Any ideas?
Installation diagram -
try swapping the modchip if you have a spare
I'd bet that though you think the install is okay, there's something amiss. Perhaps remove and re-install.