Question about converting to Magic 3.1

**nathaniel_04** · 01-26-2003,10:52 PM

Hey guys quick question. I have a Magic 2 in my ver 5 ps2 and I want to go to a magic 3.1. If I take the wires off the 2 and just swap the chips and tape off the one wire not needed would it work this way. I want to keep the one wire not needed intact so if I decide to go back or put in a diff chip.

Please give any feedback related to this topic, thanks guys

Nathaniel

**pico996969** · 01-26-2003,11:22 PM

just don't let the wire touch anything else...tape off the end...and prolly tape it down so it doesn't move, and it should work just fine...i'd be a little hesitant to leave the 3.3v wire just dangling around though...even with the tape, you never know what could happen, and you don't want things exploding

....it's an easy point to have redone in the future if you wanted to revert back to the 2, which i don't think you'll want to....

**nathaniel_04** · 01-27-2003,12:10 AM

Thanks for the reply!

Nathaniel

RalphWiggum · 01-27-2003,10:17 AM

Along those same lines, heres another question. I currently have a magic2 clone in my v5, what about swapping to a Messiah 2? And the chip I have is currently mounted outside the cage, is it still possible to mount the Messiah 2 there?

Now granted I am just asking, and I haven't looked at the actual wiring install of the Messiah 2 to see if the points are the same or not. I was just kinda curious.

User Tag List

Thread: Question about converting to Magic 3.1

Tweet

LinkBack

Thread Tools

Display


	Would you like to get all the new info from PSX-Scene in your email each day? Subscribe to our Daily Digest! Want to learn more about the team keeping you up to date with the latest scene news? Read about them now! Check out our Developer bios, too!