The above video goes away if you are a member and logged in, so log in now!
pstwo problem.... shuts down after a modbo was installed)
pstwo problem.... shuts down after a modbo was installed) –
ive modchiped a pstwo using Modbo V1.1 (www.modbo.com)
on the 1st power up after da modchip was installed the ps2 didnt give any signal to the tv... tv screen became from blue to black but then the famous booting cloud didnt show up
but power led became green.
after i opened the pstwo again and checked once again for bridges ive found only the 3.3v point abit loose on the fuse but cable didnt seem to touch some other capacitors neighbours on the pstwo board..
soldered it again and on the 2nd power up ps2 gave a green light for half a sec and then came back to stanby mode (red light)
i evenetually decided to remove the modchip but then still i get this problem
(btw i used the IN4148 fix) every time i turn on da pstwo i get for half a second green light and pstwo comes back again to the stb mode (redlight)
aNY SUGGESTIONS OR IDEA'S WHATS DA PROBLEM WITH MY PSTWO?
the v9-12 fix is in noway bullet proof -lasers are still frying out and i see them come in to the shop all the time - 3 installers in our area have refused to touch the v9-12 models as they are having laser issues even without the mod .
figured the problem but thanx anyway./...
the 202 component got fried... donno y.. i didnt have a bridge or so... i jumped it with a 50 fuse and it worx like a charm...
ronen did you even read the link I gave you?