PSTWO Disc will not spin
I modded a V12 NTSC with ***4
The install went well, reassbled unit and disc will not spin
laser moves around trying to read the disc.
I know the install went good, because I can get the "***4 Disabled" screen by holding the controller button on bootup.
I also did the matrix mod to this unit. I tried unhooking the modchip from the board but I still have the problem.
First of all just because ***4 is able to disable properly does not mean that the installation went well. Second, you should try to remove the Matrix Fix and everything else to see if you could get it to work properly again.
I have tried disabling both the matrix mod and the ***4
have you ever seen this problem before?
I read on one forum that PS14 may burn out, tested it with a meter and its still good. Actually I tested all the fuses I could find
I'm assuming that there could be a bridge between two of the pins and you can't see it. Try using a multimeter to test the pins.
same happened to me and iy blew the dvd motor, matrix fix did it