PS2 v.7 messiah2Pro no signal to TV

**Safer** · 02-03-2005,08:54 AM

Have a PS2 v.7. Got a pro solver to help me install a messiah2 pro chip.
When i got it back everything looked all right when I turned it on.But no signal came to the tv.

Then hi unmounted it again and tryed to turn it on and the same problem was there. Have opend it yesterday, and checked that the laser was OK.

Someone have any clue what is happening.

Is my PS2 DEAD???

Whit regards
Safer

**Safer** · 02-03-2005,08:55 AM

With no signal I ment not even the meny or org games was showing on TV.

**mikearama** · 02-03-2005,10:06 AM

You are getting power to the console, yes? And other functions, like tray ejecting and disc spinning, are working okay?

The black screen you describe is usually the result of a poor install, particularly around the bios points. I'd give them some scrutiny... make sure there's no bridges or splashes. You might want to get it back to the installer to proof.

**Safer** · 02-03-2005,10:18 AM

Originally Posted by mikearama

You are getting power to the console, yes? And other functions, like tray ejecting and disc spinning, are working okay?

Yes all worke fine.

The black screen you describe is usually the result of a poor install, particularly around the bios points. I'd give them some scrutiny... make sure there's no bridges or splashes. You might want to get it back to the installer to proof.

Have no screen at all.Not a black screen. NO SIGNAL.

I have not paid anything fore it, and he did go over it with a loope and found notting wrong.

Can the NTCS/PAL point be the trubble? He followed the Messiah guide,
and zeroed the described point.

User Tag List

Thread: PS2 v.7 messiah2Pro no signal to TV

Tweet

LinkBack

Thread Tools

Display


	Would you like to get all the new info from PSX-Scene in your email each day? Subscribe to our Daily Digest! Want to learn more about the team keeping you up to date with the latest scene news? Read about them now! Check out our Developer bios, too!