Printable View
I installed a Matrix Infinity modchip in my PS2 and it worked fine for a few days and then it stopped working. The eject light doesn't turn on and the tray doesn't come out and the screen stays black. I removed the modchip and checked the fuses and the PS12 fuse was blown, so I replaced it, but I still have the same problem.
Try removing the chip. Check the board for solder balls and bridges. They might be the source of your blown fuse.
What version is the PS2?
it's a V6
You might have a blown BA chip :(
Check your rest/eject ribbon cable also. Does the rest light come on red when in standby? When you press reset does it turn green but gives you a black screen and no eject light?
Yes, de reset light comes on red and when a press it, it turns green but I don't get an eject light. Do oyu think is the ribbon? If it is,where can I get one?
For sure check the ribbon, but its starting to sound like you have a blown BA to me.Quote:
Originally Posted by yalmar
what the hell is a BA. I don't know. Can I fix that?
The BA is the chip that drives your laser. It also controls the tray eject. When it blows normally PS11 blows as well and it also gives the symptoms you are describing. With out having it in my hands I cant be 100% sure but it sure sounds like it.Quote:
Originally Posted by yalmar
How can I fix that?