PS2 Newb Ghost2 Install = no video

**zizux** · 07-29-2005,01:25 PM

So I've been modding xbox's forever (easy next to the ps2) and thought I would try a ps2. I ordered a Ghost2 modchip. From here

Anyway I think I did a "OK" install but its not as clean as many of the pics I've seen on here. My plan is to remove the chip and make sure the ps2 is still in working order.

Think I could have a bad Ghost Chip? Think I screwed up (my theory).

What gauge wire do you usualy use? I have 23gauge and it seemed a bit big.

**modarea** · 08-02-2005,08:42 AM

Wire should be AWG30
For GND and 3.3V, I use AWG22

Looks like your bios point (M to W) are incorrect causing no video

Remove the chip, test the PS2 and do it again with the correct wire

**EspeN** · 08-02-2005,08:55 AM

Shit. awg 23??? How do you manage to solder to W point with that kinda wire?
Also use multimeter to check for bridges on bios points after u have done soldering.

**zizux** · 08-02-2005,01:07 PM

Well I got it working (got some 30 gauge)

User Tag List

Thread: PS2 Newb Ghost2 Install = no video

Tweet

LinkBack

Thread Tools

Display


	Would you like to get all the new info from PSX-Scene in your email each day? Subscribe to our Daily Digest! Want to learn more about the team keeping you up to date with the latest scene news? Read about them now! Check out our Developer bios, too!