Problems with Infinity install in a NTSC v2 board GH-004
I am installing an Infinity in a friends ps2 NTSC v2 with board revision GH-004. I am attaching a picture to show what my problem is. There is a chip that has been moved by sony, and the place they put it is the same place that the instructions show to solder wires to. I soldered the wires to the leg of the chip, and when I try to boot the ps2 all it does is it turns on, no video, the dvd drive makes a quick grinding sound and it will not eject. The blue light on the eject button flashes constantly after I press it, and it does not stop until I turn the power switch off. Anyhow, any Ideas? This ps2 has been refurbished by Sony, and it was working perfectly fine before i started modding it. I think Sony put the chip in the other spot when they refurbished the ps2.