problem taking apart a v10

Flatliner · 01-08-2004,06:48 PM

I have taken off the screws, flipped it over & can now see top of DVD drive etc....

How do i remove the rest without breaking the ribbons ?

**necrolop** · 01-08-2004,06:52 PM

Unscrew the fan, lift up the fan slightly, take off the screw that lays underneath it. Take off the screws of the controller port then disconect it. Now grab the PS2, anf flip it upside down. Lift up the bottom and take it off. This will expose the otherside and the rest will become apperent.

Flatliner · 01-08-2004,07:28 PM

thx....taken it apart now &..................pulled the fan off the motherboard!!

How do i put the fan back on? (Once i manage to install the MOD)

**necrolop** · 01-08-2004,07:38 PM

It just simply plugs into the connector.

**TomasAlmgren** · 01-08-2004,07:47 PM

Hmm doesnt sound like you should go a head with the install. Great chances are that you might damage your machine =(

Flatliner · 01-08-2004,07:51 PM

the connector came off the motherboard.............

**necrolop** · 01-08-2004,07:53 PM

Get wire, install it to the pins of the connector, then solder wires to the board. Put hot glue on it to give it a hold back on the motherboard. Better yet if you can directly solder the connector back into its place.

Flatliner · 01-09-2004,03:44 AM

I'm can't tell where it goes on the board? Can i not just run a wire from one of the 3.3v places on the board & another to the earth?

If not, can someone post me a pic of the v10 fan connector position.

SealWolf · 01-09-2004,07:47 PM

is disassembling a V10 is exact same as V9? Thanks in advanced.

User Tag List

Thread: problem taking apart a v10

Tweet

LinkBack

Thread Tools

Display


	Would you like to get all the new info from PSX-Scene in your email each day? Subscribe to our Daily Digest! Want to learn more about the team keeping you up to date with the latest scene news? Read about them now! Check out our Developer bios, too!