The above video goes away if you are a member and logged in, so log in now!
Problem - Magic5 on V9 resulted with black screen
Problem - Magic5 on V9 resulted with black screen –
Hello everyone !!!
I installed a Magic5 on V9 and I get the following:
PS2 lights, logo comes up with voice, cd starts to roll, Screen becomes black and stays like that while cd is reading.
Anyone have an experience with a black sereen sympthom?
Try this :
Use fat wires for +Vcc and GROUND.
And DONT crossing the bios wires .
Well, I used 22awg for the GND/VCC and made sure all the M-V are the shortest as possible with no crosses.
Still the same results - the PS2 is detecting the CD , starts to load it, and before you think the Playstation logo is about to come up, it just stays with black screen.
Any help will be welcome
make sure you Y wire is away from other wires
clock problem sure is R point
Problem Fixed !!!
Thanks guys for the tips - I resoldered the R point and made a bypass to the Y wire so it won't cross any other wire.
I don't know which one fixed it but it works now.