The above video goes away if you are a member and logged in, so log in now!
Pic. enclosed Must see! Best/easiest way to solder controller points
Pic. enclosed Must see! Best/easiest way to solder controller points –
Take a look at the pic below. I was having problems soldering all the points on the controller chip of my ps2, kept shorting them. The problem was that I was trying to solder all the wires from the same side. I finally came up with a much easier way to do it. I basically alternate every other pin, one wire soldered from the top and then the next one soldered from the bottom/side. This is WAY easier than trying to do all the wires from the same side. It gives you a lot more room to work with and less chance for hitting adjacent wires that are already attached. I hope this helps some people out there who are having a tough time keeping the pins apart while soldering to this chip.
Glad to hear it, hope this helps some people out.
Do you have a better pic than that I really can't see what you have done. Really fuzzy. Thanks
Yeah, its really blurry...