The above video goes away if you are a member and logged in, so log in now!
PAL v13 problem
PAL v13 problem –
To explain the situation i must say b4 that i've modded about 50 or 60 V12 consoles with Matrix MX4/Infinity and NeoII Fix. Until today, not even 1 was returned. I used to have a V12 too, but a few weeks ago I had to sell mine and i bought a new.......at the time i didn't knew that the new console was a V13. I noticed the difference on the MOBO where the Neo Fix is applied, but i applied the fix, installed the Infinity and the console worked ok for +/- 2 weeks. After this 2 weeks, something strange happened. I was testing some dvd games (backups) and all of the sudden the console shut down when booting a dvd. I tryed several times, but always the same behaviour......with a dvd/cd in the tray, 2 or 3 seconds after i turn the console on, she turns off automatically. If i turned the console on without any dvd/cd in the tray or just having the tray opened, the console don't turn off itself. To see if the problem was of the fix/chip, i removed both. When testing the console, she didn't boot any cd/dvd. I bought a new console, V13 again. Installed the fix, chip and the first time i was testing it......same behaviour. 2 or 3 seconds after turn it on, she turns off.
When this happened i came to this forum and realised that i had a v13 . I should have come here the first time i saw the new console, but i haven't, so......I've read some posts that refer no fix needed on the V13.
My question is......the fact of have installed the NeoII fix on a V13 blew the console?
If not, what could be causing the automatically turn off?
All help is appreciated and thanks in advance.
remove the neofix and put a real fix ( subzero) .
OR play with resistors in J point