The above video goes away if you are a member and logged in, so log in now!
New PS2's.... –
i guess im gonna buy a new ps2 at bestbuy since my old 39001 crapped out. Just making sure even the latest ones still can be modded with a DUO3 or Ghost2? wasnt sure if they did anything anti-mod to the latest slims compared to the older slims? thanks
I know that the Crystal Chip's and Matrix Infinitys can be used in the new ps2's. I am not sure about the chips your mentioned.
is there much more involved work in taking apart the slim ps2? the fat ones i can do blind folded but the slim looks to be more work.
on the new slim ones the via's are a lot smaller, its its not too difficult.
make sure you find a small enough philips screwdriver (#0 for the inner plates and you need a #1 for the case) to help take the inner plates off.
I agree with this post, the slim is actually really easy to take appart, the only error i had was takin the case off (got stuck on the poser button)
Originally Posted by Jit
A kind word and a gun gets your farther then a kind word alone -Al Capone
PS2 V7|120 gb WD|Matrix Infinity Green Dot (Thanks to NúTMúCH)|
Pearl White Case
640GB Rebug 3.55.2cfw
i bought the DUO3 modchip and looking at the install pics, the solder points are all on the bottom of the board and not the top. is that correct?
You will have problems with duo 3 and v15s.... the boot rate is horrible unless you add a 1k resistor across ground and power pad.