Can you refresh my memory as far as the function of each pin. TIA
Printable View
Can you refresh my memory as far as the function of each pin. TIA
Really only need pin 3
taken from a post by charlie_ps2:
PIN #1 = supplies + (power) to the chip
PIN #2 = sends SCEx signal out to PS 2
PIN #3 = PS 2 drive tray pulse tells the BA5810FP chip whether to expect a drive tray open or close
PIN #4 = checks/signals RESET button on the PS 2
PIN #5 = closes PS 2 drive tray
PIN #6 = opens PS 2 drive tray
PIN #7 = checks if game CD is PSX/PS 2 (If PS 2, immediately stops SCE signal & restarts when a "tray close" is seen. If PSX, it stops after about 15-20 seconds)
PIN #8 = supplies ground to the chip