Need help : Is there any modchip that work On PS2 V0 jap

[haniki]

Hi,
guys i have a V0 PS2 scph 10000 (the first ps2 that appears in the world)
my problem is i have 2 messiah 2 pro 1.33b.
they work on V3 model but not in that one i don't understand.

So I have tried to put a matrix infinity make some research to find the 'Y' point.
Note : the matrix team says it do not work on scph 10000
but after installed all :
I can boot up on configuration when i power the ps2 by pressing circle and cross (O + X)
I can flash the modchip (like infinity homebrew) by pressing reset until blue light appears and boot from cd.

WHat i cannot do:
the controller seems to not respond anymore.
it works only when i go to modchip configuration.
I cannot go to matrix dev (by pressing triangle)
i cannot boot any import (pal or us) or backup games.

do you think that they will be a solution ?

[N£TM£ÇH]

well the Y point is just a 54.5 mhz clock, i believe v0 has a 54.5 clock on it somewhere... got any pictures of the board ? i might be able to point ou the clock point for you.

[messiahfan2003]

The Ghost2 which has a warez firmware is workable on the v0 jpn consoles.

[qortizone]

Just use the old Mars chip.

[drewid]

yeh the ghost2 works well on the scph-10000, just use the old messiah2 diagrams..

[kreg]

yeh the ghost2 works well on the scph-10000, just use the old messiah2 diagrams..

can you tell me anything new about a modchip for the v0? i have a scph-10000 that i would like to mod to work with usa games. usa dvd movies, and let the network adapter/external hdd work when chip is disabled, etc...

i don't think there is such a thing as an hdloader for the external hdd, but if i'm wrong please let me know.

i have been tossing up between an old DMS3 2.0, Messiah 2 Pro, and the Ghost 2. I have no experience with the mars chips. i hear the magic chips worked but can be limiting or hard on the laser. not sure what would be a good chip to look for. i've installed plenty of chips on current systems like v4-v9, but never one of these old v0's. Do you have any recommendations? even if it's an impossible chip to find, i'd still like to know what would be a great choice.

thank you,
-kreg

[mabcom]

Well the mars messiah2 and Messiah clones are working fine in the 10000 and 15000 models

i have done lots of them ,
but beware they are not that easy as a v4 till v10 because you have to solder lots of wires directly to the dvdcontroller

but if you take your time it will work

good luck
MABCOM

[haniki]

Hi, just to tell everyone who was interested in mod a scph 10000 ps2.

i have put for first a messiah 2, it has works perfect but i have take off the modchip because i was out of stock and then put that one to a new one.

but however, i have never succes to make it works again with a new modchip.

And today, i have put a ghost 2 modchip flash it, and it works perfect.

regards everyone