The above video goes away if you are a member and logged in, so log in now!
Need help with No solder V4 mod with swap magic boot disc
Need help with No solder V4 mod with swap magic boot disc –
I installed the no solder v4 mod on my ps2 30001R which is the V4R.
1.I opened up the ps2, took it apart.
2.Disconnected the ribbon cable that comes from the eject button
3.Unplugged the 3rd plug on the right of that ribbon cable which is the red plug.
4. Plugged the no solder chip into where the ribbon cable is supposed to go.
5. Plugged the little red plug into the no solder chip connector.
6. Plugged the connector from the mod chip into the 3rd red plug slot.
7. Plugged the ribbon cable coming from the reset into the brown slot of the mod chip.
Then i assembled everything back, put in the swap magic, then boot up and i see the Insert Disc , the problem is when I push and hold the eject button, the light is supposed to turn orange and it doesn't. So the tray ejects but the light is still green. I put in my cd-r backup and push X on the controller once the tray goes in. The screen just freezes.
I think the problem is my power is green and doesn't turn orange. I tried taking out and putting in the chip 3 times and still same result, green light still and no orange when I push and hold down eject.
I even tried taping the mod chip to hold it in place but still not working.
I tried playing my ps2 originals and they still work with the chip in.
Anyone got some tips for me?