Need GOOD X0-2 v7 Diagrams

**necrolop** · 10-28-2002,07:42 PM

Ive been told to not use the b c points on the vias spots, found some alternitives. Can you just just tell me what you all used? The support for this chip really blows ass. Thanks.

**Racer** · 10-28-2002,07:50 PM

Diagrams are available on www.psxtune.com

But here is what I have used.

**necrolop** · 10-28-2002,08:11 PM

And you used those B and C points?

**Racer** · 10-28-2002,10:28 PM

Yep. Just like they have it.

I do think you can use the B and C from magic though, but I havent tried it.

**sooki2kx** · 10-28-2002,11:34 PM

yeap, you can use the b and c from the magic2 .. done it ... works fine..

cityhunter · 10-29-2002,12:28 AM

Same here, used Magic 2's B & C points, and 3.3V, ground, and many other points that have corresponding locations.

**HiProfile** · 10-29-2002,05:00 PM

I used the alt points despite the fact that its a bum chip & I'm supposedly getting a refund soon. Pitty, as that tiny chip fit so perfectly.

If you try a continuity test between those X0-2 points & the alt points [from a Magic2 diagram], there is the typical .3-.5ohms [or .03-.05?], which means a direct connection between the respective points. It took me forever to get the via points to stick [a v4's vias are easier than a v7's...], but they took the heat.

User Tag List

Thread: Need GOOD X0-2 v7 Diagrams

Tweet

LinkBack

Thread Tools

Display


	Would you like to get all the new info from PSX-Scene in your email each day? Subscribe to our Daily Digest! Want to learn more about the team keeping you up to date with the latest scene news? Read about them now! Check out our Developer bios, too!