The above video goes away if you are a member and logged in, so log in now!
MXL2 Problem –
i got my modded ps2 over a year ago now but i have never been able to play ps1 games or dvd movies on it,i bought it pre modded with the mxl2 chip,does anyone else here have this chip?
i tried the method of holding in the reset button for 3 seconds but it doesnt work,if i hold it any longer it will go back to standby,any ideas what could be causing it? maybe it was a bad install
hu... your are maybe not booting it well...
first the console must be in stand by... than you hold reset... and you can hold it 1000000000sec it will never stand by again ... (maybe but mine doesnt go in standby after 30 sec or more...)
for DVD movie you just hold it longer so it deisable itself...
hope it help
on v9-10 if u hold it for more than 3 sec it will go into standby. my guess is laser then mayb bad installion
Didnt they change the MXL2 sodat it uses eject instead of reset on v9/10 becouse I can remember there was a problem with the chip not being able to disable if you hold the power button in for longer than 3 seconds becouse the mechine would switch off.
So try switch the mechine to standby(red power Led) turn the mechine on holding the eject button in for about 3 seconds or untill it is about half way ejected,then insert a ps1 or dvd movie.
check the reset wire and scex wire.
anyway try to load movies with the mod complete off.
DISABLING MXL2 (Stealth Mode).
With the PS2 on standby position (red light ON), press the reset button and keep pressed until the blue light turns ON.
Release reset button and press again within two seconds.
The MXL2 is now completely disabled and transparent to the system until the PS2 is brought back in standby (red light ON).