Modchip Diagrams, Tutorials & Firmware upgrades

Quote:

---

Originally Posted by dirar

thankes i found the its site MATRIX InfinitySE, DNS-1011
http://www.matrixmod.com/
but can any one give me any data about it
if its an orginal and if can flasih it
thanks agen

---

MATRIX InfinitySE is a Matrix Infinity Clone,you cant change enay settings in the config menu or els it kills the chip,can be flashed upgradeble to 1.5beta andy later firmware will kill it,there has been reports that it has a bad boot rate,basicly its a very crappy clone.

Quote:

---

Originally Posted by N£TM£ÇH

solder the power wire to the side of the black fuse ( number 30 )

---

sorry for my ignorane, do i solder it directly to side of the '3 0' black fuse or on the metallic object located on the side of the '3 0' black fuse.

the fuse has 2 metal sides.. either side is fine.

Does anyone have the diagrams for installing an Origa Chip in a PS2 v4 NTSC??

Thanks!!

I think this is it. http://www.digital-x.de/UMBAUTEN/PS2...gajap30000.htm

Hi guys,

Anyone now of a ripper IV diagram for pal scph30003 board revision GH 006, Found one for gh004, 005 and 007 and they are all different. I,ve also tried the chip with all 3 diagrams, either got rsd or eject would refuse to close the disc tray.

Anyone?

Cheers :banghead:

Ripper 4 is a clone of the ripper 3 modchip. So its a clone of a clone.. not flashable. Use the ripper 3 diagrams.

Ripper 4 is acttually just a ice clone,it has nothing to do with the ripper 3 excpt for the name.

Do you know the "slim chip"
It's fake ?

Ive never heard of the slim chip,do you have a website or a pic of one?

Then I can tell you if its fake or not.