Modbo 4.0 or Modbo 745/760?

[user112]

Which one is better?
Has anyone got any experience with them?

P.S. No clone wars here.

[gamecubesuxs]

The Modbo 745 and 760 are the same chip just different setups. The 760 you have the option of a wire install or a direct solder of the bios. The wire install is a little hard on this chip it has a bad layout. The 745 is all wire and has a good layout. If you install either of these 2 correctly it runs exactly like a Matrix Infinity only you cannot change the firmware at all your stuck with a hacked 1.82 ver. The Modbo 4.0 I have no experience with but Ive got a feeling its the same thing as the 745.

[wmb88]

yes, and 750 , 4.0 are the same as 745. they are just made by different groups.

[user112]

I'm mostly interested whether the Modbo 4.0 has a fully working configuration menu, like the 745/760. And whether it's free of most clone quirks, like a need to do a PAL-fix, etc.
Cause I'm leaning more toward the Modbo 4.0, since it has a smarter PCB layout, allowing a nicer install, but still not sure.

[fasman]

Modbo 4 doesnt have a resonator and thus it needs 1 extra wire (CX) ,in my personal opinion it runs more stable than Modbo 760 and it uses the normal MI firmware with all of the logos intact.

PS Modbo 4 really does fave nicer installs becouse of its smaller pcb http://www.psx-scene.com/forums/atta...1&d=1151601681

[gamecubesuxs]

I'm mostly interested whether the Modbo 4.0 has a fully working configuration menu, like the 745/760. And whether it's free of most clone quirks, like a need to do a PAL-fix, etc.
Cause I'm leaning more toward the Modbo 4.0, since it has a smarter PCB layout, allowing a nicer install, but still not sure.

With a modbo 745 and 760 the config menu is all functional just like the MI, Which means you can switch video modes and change the axis, ATAD patching, Green FIX, Macro off or on, DEV1 and 2 etc....

[user112]

fasman:
So, speaking about the 4.0, is it possible to save the configuration menu settings?
Do all the settings work like they should? In particular, for PAL/NTSC/PAL60.

gamecubesuxs:
Yes, I know about the 745/760, but what about the 4.0?

[fasman]

Yes all setting work 100% ,it doesnt kill the chip

[user112]

fasman:
Sorry, but do the settings remain after power-off?

[fasman]

Yes they do,and seem to be perfectly working,in that console I could only test Pal/NTSC and Y fix all worked 100% ,so the rest of the setting should work fully aswell.