The thirst things you'll need are:
-15Watt Solder Iron with a fine Tip, like a 0,12MM or a 0,5MM or even a 1MM does the trick.
-Kynar Wire AWG 30.
-Solder with paste included (Can use 1MM or lower . . . .)
Thirst things first, Never do this when you did not practiced on an old Motherboard. I used a Pentium 1 that was damaged inside as the practice method. I never soldered in the PS2 but I knew that if somebody could do it, I could . You must have a stable hand and the right things to handle this job, if you don't Solder very well, NEVER DO IT!!!!!!!!!!!
(Installation instructions?? check this link: View Instructions
(Opening your Ps2 form beginnig to the end? check this link: View Instructions
Allright, the Installation was relative medium. I used Kynar Wire AWG 30 and that is great stuff!! I used a 1MM fine tip Soldering Iron. Some things were incredibly small to do it with 1MM, so I simply grabbed a metal thin (about 0,5MM) needle and I putted it in the connection piont were the 1MM was already plugged in. It worked for a while and I grabbed a new one when the old one was damaged, worked great BUT . . . . . A soldering Iron with original is much better!!!!!! So after Installing and putting the Mainboard and everything in the PS2 again I tried it out. Well Incredibly but crazy it worked like Messiah2!!!!!
The loading instructions are like Messiah2 and are just easy!!
Well everything worked, even DVD9 worked well, I tried a Snes Emulator: just worked well, I tried EA Sports games: Worked well!!! Everything worked well like Messiah 2!!
So this is just Messiah 2 for a cheaper price!!!