MI blue dot v1.39 weird problem....

**cakcetin** · 02-08-2005,01:33 PM

Well I read all post about original MI but I can't see anything about my problem,
I buy 100 piece original MI blue dot and I installed 5 piece yesterday in v12 and v10;when I try install sixth MI in v10 not read anything

(dvd-r cd-r hk gold...)

But I can "disable" chip,I can enter the configuration menu by triangle and circle button,I can fast boot original game etc...Not work any backup.When ps2 read original disk write under logo infinity v1.39?
I try upgrade firmware 1.39 (so I think maybe chip is blank)But not read ugrade disk

Any idea?

**N£TM£ÇH** · 02-08-2005,01:51 PM

you have to boot the upgrade disk a certain way. insert the disc then put the ps2 in standby. then tap reset and it will boot as long as your wires are good. Infinity is only shipping homebrew chips for now on so we can keep it legal like.

**cakcetin** · 02-08-2005,02:11 PM

Qute

**cakcetin** · 02-08-2005,02:21 PM

Pardon;
Thank you NETMEÃ‡H I try tap reset button after stand by but nothing...I remove chip and install another MI with same cables now not problem with new MI.
I installed this MI in refubished v7 board same problem...
My v7 and v10 pal.
Sorry for my english,
Regards.

**Dolf** · 02-09-2005,06:11 PM

i have the same problem with MI / blue dot in two v9/pal-consoles. i can't flash it(programming failed) .
in a v7/pal-console the chip work fine , but also the flashed chip's don't work in my v9-consoles .
the installation is right. i changed the MI with a MXL2(only the chip's) and it works.
i hope the quality of this new MI's is the same as the older version's ? (saifun-chip)
must i look at some specials by the installation?

who can help ?

**marcus21** · 02-10-2005,02:45 AM

Try the 1.36 infinity manager off your memory card

**9HOMERSIMPSON9** · 02-10-2005,06:32 AM

They are 'HOMEBREW' chips, they will not boot back-up games, you have to flash it first!

Flash it the way NÂ£TMÂ£CH said too flash it and you should be fine...

**Dolf** · 02-10-2005,06:33 AM

there is no reaction from the chip. ( no dev.mod,no disable, no triancle-circle mode)
the recovery mode works ,but the flash stop with "programming failed".
the installation is right , a MXL2 works with the same installation.

regards

**loy** · 02-10-2005,06:50 AM

dead chip possibly. I have had a problem wiht one and only one that it won't authenticate discs. Even after upgrading no backups will boot. Only booting via recovery mode works

**mikearama** · 02-10-2005,08:21 AM

Originally Posted by Dolf

but the flash stop with "programming failed".

If you're getting into the disc, and are pressing START to begin the programming phase, and THEN experiencing the "programming failed" error, I'd heavily suspect the chip. Time to send if back for another.

User Tag List

Thread: MI blue dot v1.39 weird problem....

Tweet

LinkBack

Thread Tools

Display


	Would you like to get all the new info from PSX-Scene in your email each day? Subscribe to our Daily Digest! Want to learn more about the team keeping you up to date with the latest scene news? Read about them now! Check out our Developer bios, too!