Messiah2 and V7

[cONEction]

hey guys,

After modding the ps2 with MarsII and Matrix MXL2 , i decided to try the one and only Messiah2 pro 1.33 on a V7.

After the moddig, i tested everything and both PS2 and PSX backups booted perfect.

But now i have closed the case, i test it one more time, i get no video/sound. i turn it off, on again. now i have video and sound.

wtf is wrong? sometimes it just dont give video or audio.
I had the same problem long time ago with MarsII, i solved that by replacing the ground/power wire. but this time im sure i did everything good.

Is it that Messiah2 is just crap nowdays? or am i just a bad installer?

[Bgnome]

open up the case again.
if it works, youve got a pinched wire or short on the metal cover. if it doesnt, you probably knocked a wire loose when closing up.

[mann75]

its not the chip the ms2pro is as good as any chip you have a loose ribbon or even a bad connection.

[cONEction]

Originally posted by Bgnome
open up the case again.
if it works, youve got a pinched wire or short on the metal cover. if it doesnt, you probably knocked a wire loose when closing up.

Problem is i rechecked all the wires, eveything seems fine.
I get a no video/audio once in 10 reboots. so its working in 90% of cases, but it just sucks

I want a 100% fully working ps2

[villasg]

Ok look : check and resold ALL bios wires.
The problem is a dry joint.
Cheers

[cONEction]

Originally posted by villasg
Ok look : check and resold ALL bios wires.
The problem is a dry joint.
Cheers

ok thnx man, i will resolder them

So just resolder MNOP QRSTUV W ?