The above video goes away if you are a member and logged in, so log in now!
YEp... I've done the config. Ps2 goes directly to browser/option screen.
By testing games I verified that sometimes both originals and backups are booting only after Browser/Config screen... But most frequently ps2 goes to red screen or hangs on browser.
Maybe a loose wire ...
Did u have problems booting originals before modding the PS2?
U could have to tweak the laser a little.
Also, what gauge and lenght of wire did u use for +3.3 and gnd?
No problems on booting before modding. Awg 32 - 15 centimeters
long to connect gnd and +3,3V.Connexions are all OK.
awg 32 is very small and could be your problem, although I did install messiah with awg 30 with no probs.
Try something like awg 24 for +3.3 and gnd and make sure your gnd is short (5 cm)
How is it going with the messiah m8?
You are really kind... Actually I got a bad flu and very high temp. Probably I'll be able to operate on it only 4 the weekend. I'll report you any progress... Tnx again
BTW: Listen to me m8, keep away from flu virus !!!
Finally i did it. Installation has gone ok but there was not booting by using cdr or dvdr. The problem was in laser allignment. I tryed to fix by pot regulation, using an oscilloscope... Worked for few hours then I had to bought and install a new laser. Now it works very well. I wish to thank you all in here... You have been very kind in help me solving.
Seeya next time.