The above video goes away if you are a member and logged in, so log in now!
Matrix Infinity Problem
Matrix Infinity Problem –
I have a problem with a Matrix Infinity that I had just installed a week ago. It was working fine for the whole time. I then disabled it and after I got the disabled screen and reseted and it never came back on it just acts like there is no chip in there originals work fine. Is there some kind of default mode I can get it to? And it is a real one not a clone.
Try holding down triangle + circle down when you boot the ps2 up. See if you can get into the configuration screen.
Try unpluging the ps2 then powering it back on.
Tried that and it won't come up.
Originally Posted by T07N
I left it unpluged for a day yesterday and then with the power switch on off for a few hours and it still didn't work
Originally Posted by SlinkyDink
Try reflashing the firmware in recovery mode. If that doesnt work (if you cant boot the flash cd), it sounds like something isn't working right with the chip or a wire is loose or something.
no once it is disabled it is Permanantly disabled.. there is no way of bringing the chip back alive. its either the chip is already fried...
??? You're saying once you disabled the chip it's gone for good? LOL
Originally Posted by FightingSpirit
No wires were loose but I just resoldered everything again and changed the power and gnd wire from stranded to solid 20AWG and it seems to be working again. But I have a problem now with all my Codebreakers 6,7,9 it just says game failed to start for all the versions with or without codes. All other games works fine without it. Is the chip sleeping to early or something?
Did you flash it with the latest firmware?