The above video goes away if you are a member and logged in, so log in now!
Matrix Infinity/Crystal chip not working on ntsc v13
Matrix Infinity/Crystal chip not working on ntsc v13 –
Has anyone in the US tried installing either chip in a ntsc v13 yet
Matrix I can flash and get into the config screen but backups give RSOD
Crystal chip try to flash looks like it loading goes to black screen and eventually goes to RSOD
This is my first v13 I dont know
Did 5 v12's before this same day with muppet and no problems mind you I am a expert installer
Model # SCPH70001CB
Has just the cat5 network plug no telephone jack
Board is a GH032-32
Last edited by ZootAllures; 08-16-2005 at 05:06 PM.
Update just took that infinity I put in the v13 in a v7 and the chip is working. It just won't work in the new ntsc v13
Matrix Infinity & Crystal Chip works with v13.
Have you actually done one yet in a NTSC v13 PStwo with the GH032-32 board?
Originally Posted by T07N
I must be a total dumbass then. Done hundreds of v12s with no problem. I guess its possible I can **** up 2 different installs in a row. I did not use the same wires on both each one the wiring was removed and fresh wires were used.
No, but I've heard of others that did and confirmed it.
I installed a modbo in a bunch of v13's and they all worked (modbo isn't a real infinity, but if the clone works then I imagine the real chip would work just fine)
Neoasic had a news update listing some popular mod chips, and all of them worked just fine with the V13 (including the infinity and crystal)
Update: Iam a dumbass done to many today Finally got both chips working had a bad wire. Thats right dumbass out!