The above video goes away if you are a member and logged in, so log in now!
Magic2 V2 Tray Problem
Magic2 V2 Tray Problem –
Hi, I got a real problem, I have installed the magic 2 in a ps2 ver 3, and everything boots ok, but I got a problem:
When I push the the eject button (first time when I power the console, when it's cold), the tray comes out, and when I push again eject the tray won't go back and I can see the laser eye making a check with the tray out. If I push reset the tray still wont go back. After a while hardly starts to go back step by step, pushing again eject, reset, eject...After o while, aprox 10 min of functionning, it starts to work ok. I have this problem when the console is cold.
If the cd is in the console it boots ok and works ok, if I press reset when it's red. I took the chip out and I got the same problem, I cheked the soldering point again and again, but no result.
What should I do, got any idea ?
Maybe the BA chip that ejects the tray is bad. Check the legs of the BA chip also for any shorts or solder balls that may have rolled under the chip. Did you have a NEO 2.2 in the console before?