The above video goes away if you are a member and logged in, so log in now!
Magic 3.6 installation whout using clip
Magic 3.6 installation whout using clip –
ive bought Magic 3.6 for V4 with GAP but the clip was defective so i cut it off and soldered the wires directly to the bios chip as per magic 3.1 diagram, i traced them through the clip to th bios chip, however i dont know where the white and black wires (highlighted to the attached diagram) connect to the chip because they do not exist on the 3.1 diagram, but i traced them through the clip and found where they went. My ps2 will now play ps1 games, ps1 bakcups, and movies, and movie backups, but it won't plays ps2 original or ps2 bakcups., but if i unplug the chip the ps2 orignals work fine.
Please help me locate the problem!!
those 2 wires you pointed to have no use... i suggest you solder the wires to the little via spots on the magic 3.6. Use 30 gauge wire on the cd/dvd controller chip ( kyner or enamel coated wire ).
Look at picture below, hope i helped you !