The above video goes away if you are a member and logged in, so log in now!
magic 3.5 ---- hELP!
Most likley it is the BGA clip that is causing the problem so many have come through here in the past 2 weeks for repair from people that tried to install it. Those pads can rip off easy if you are not carefull! If there is NO VIDEO NO SOUND check the BGA clip. If you PS2 boots and no backups boot most likley it is a Bios clip problem.
i got rid of the BGA clip and soldered the points manually
still no luck, as u said -- no video no sound
i removed the modchip all together (just unhooked the clips from the modchip and left everythin inside) and turned on the PS2.. my original PS2 game loaded fine, i was very relieved.
anyone have the solderin points for the BGA clip? maybe i made a mistake on that.
a diagram would be appreciated.
ok, i figured out my old problem. a had a wire that wasnt soldered correctly... (it just popped out)
the ps2 boots fine w/ the modchip inside... new problem --
ps2 backups dont work (only tested DVD-r)
and ps1 backup doestn work
any suggestions? LOD, u said it may be the bios clip?
i made sure i clipped that darn thing in place, it even made the kick sound....
i duno wut else to do.
to add on to my previous msg, my original Gran Turismo 3 works fine. ( so actually, the modchip is kinda useless right now )
just tested another ps2 backup (cd-r).
get the same thing... red screen of death.
im sorry for these multiple posts :|
could this be a problem where the BGA clip points would have gone? I soldered those wires manually.. usin this diagram
would appreciate some help.. :|
everythin else = red screen of death