Jap 18000 with DMS3 V2

**qwm** · 05-06-2003,01:32 PM

If you have a jap 18000 with a GH-003 board you can install DMS3. I just installed one and its all works fine, dev mode, dvd region free, ps2 and ps1 games...

**Da Brass** · 05-06-2003,03:38 PM

Originally posted by qwm
If you have a jap 18000 with a GH-003 board you can install DMS3. I just installed one and its all works fine, dev mode, dvd region free, ps2 and ps1 games...

That's Great news! Do you mind sending me the diagrams you used as well as a snapshot of your install? This will be a great help to all those with the JAP 18000

I'll make a post about it in the News.

godfather477 · 05-06-2003,10:08 PM

i bought mine from a supplier with the chip pre-installed.

**qwm** · 05-08-2003,02:51 PM

Man, I already shiped the ps2 to the owner... I forgot to scan the install, If other jap18000 come for install I will send the pictures

I have used the XO diagrams for the bios points (small board attached), the Scex point I used the same as used with origa and D and E point I used from DMS3 diagrams as well (main board), doing in this way the wires for D/E takes diferents routes and don´t cross with any other ... points at controler is the same to everyone.
Its a real mix-install

KaISeR SoZEi · 05-08-2003,08:06 PM

good job !!

**qwm** · 05-08-2003,11:49 PM

Maybe this could work with other points (getting all bios points from main board for example), but I did so much tests with M2 pro and DMS... so when finally works I stop with all hardware tests and opened some beers to get drunk

It seens there are 3 diferent boards to jap18000 and I tested with GH-003 (with bios in the small board attached) I hope DMS3 could support other 2 boards versions.. If I get another I will post the results....

charlie_ps2 · 05-09-2003,03:50 AM

I have posted Messiah 2 diagrams for Jap 18000 GH-008 in the FAQ/Guides section.

We have that 18000 here but couldn't get the earlier M2 chip working on it. It might be the diagram (which I derived) on the other hand the DMS3 might work on the GH-008 with that diagram.

So do let me know.

**Marck** · 05-09-2003,03:59 AM

The SCPH-18000 GH-3 uses the same bios of the SCPH-15000 TI.

The big deal is to make the chips work on the ones that use the bios 012.

charlie_ps2 · 05-09-2003,06:37 AM

Originally posted by Marck
The SCPH-18000 GH-3 uses the same bios of the SCPH-15000 TI.

The big deal is to make the chips work on the ones that use the bios 012.

Agreed.

gogumma · 05-12-2003,06:48 PM

for the dms3 did you use the smaller wires like it does in the pictures on the website?

User Tag List

Thread: Jap 18000 with DMS3 V2

Tweet

LinkBack

Thread Tools

Display


	Would you like to get all the new info from PSX-Scene in your email each day? Subscribe to our Daily Digest! Want to learn more about the team keeping you up to date with the latest scene news? Read about them now! Check out our Developer bios, too!